Removing a stripped L key bolt can be a frustrating experience. It’s easy to strip the bolt’s head, especially if you’re using the wrong size L key or if the bolt is rusty or corroded. Once a bolt’s head is stripped, it can be challenging to remove it using conventional tools. However, there is still a solution to resolve the problem – punching it out.
Before we begin, please note that this technique may result in the bolt being unusable. It is essential to proceed with caution and to use the correct tools for the job.
Removing a stripped L key bolt using a punch
Here are the steps to remove a stripped L key bolt using a punch:
Step 1: Gather your materials. You will need a hammer, a punch, and a pair of pliers.
Step 3: Place the punch at an angle on the side of the stripped head bolt and tap it gently with the hammer.
Step 4: As you tap the punch, apply pressure in the direction you want the bolt to turn, which should be counterclockwise.
Step 5: Keep tapping and applying pressure until the bolt starts to turn. Continue to turn the bolt until it is completely removed.
Step 6: If the bolt does not turn, try tapping the punch a little harder.
Using a punch to remove the L key bolt can be a bit tricky, but it is an effective technique. It is crucial to hold the punch firmly in place with pliers and tap gently to avoid damaging the bolt further. Remember, this method may result in the bolt being unusable, so use it as a last resort.
In conclusion,
removing a stripped L key bolt can be a frustrating experience, but with the right tools and techniques, it is possible to get the job done.
While the punch method is effective in most cases, there may be instances where the bolt is severely stuck, and this method doesn’t work.
In such cases, it may be necessary to use a welding method to remove the bolt. This involves welding a nut onto the bolt’s end, which allows you to use a wrench to unscrew it. However, this method requires a certain level of expertise and should only be attempted by experienced welders.
